MI-Sensor Element Features and Estimation of Penetration Depth and Magnetic Permeability by Magnetoresistance and Magnetoreactance of CoFeSiB Amorphous Wires

The magnetoimpedance (MI) of amorphous soft magnetic Co
_68.15
Fe
_4.35
Si
_12.5
B
₁₅
wires produced by the in-rotating water quenching technique was systematically studied. The behavior of the MI-element designed for magnetic sensors was examined in an external longitudinal dc magnetic field in the low-frequency range (
${f} \le $
1 MHz) and at the beginning of the intermediate-frequency range (2 MHz
$\le {f} \le $
5 MHz). A critical frequency of about 5–7 kHz was observed with an initial increase in the MI effect. A maximum MI ratio of 334% was recorded at 0.95 MHz in a magnetically saturated MI element. The intermediate-frequency range is explored using the magnetoresistive (MR) and magnetoreactive (MX) components of MI
${Z}$
. The MI anisotropy field profile occurs in the MHz operating frequency range with values increasing up to 25 A/m, exhibiting frequency dependence. The magnetic penetration depth was calculated using experimental magnetoresistance data, and the values obtained were about 3–
$4 \mu \text{m}$
for 5 MHz, showing a saturation trend. The magnetic permeability is analyzed in the framework of the electromagnetic classical high limit model of a cylinder, which includes penetration depth and magnetoreactance. In our experiments and calculations, the classical high limit is satisfied in the operating frequency range of a few MHz. The magnetic permeability peak value is about 35% lower than the comparable data of amorphous CoFeNiMoSiB glass-coated microwires.