Online Decoupled Multi-Parameter Identification of Dual Three-Phase IPMSM Under Position-Offset and HF Signal Injection

Accurate and updated knowledge of electrical parameters is of great importance for high-performance control of motor drives. However, the common challenging issue in existing identification methods is to construct a full-rank model with low parameter coupling. In this article, an online multiparameter identification method has been proposed for the dual three-phase interior permanent-magnet synchronous motor (IPMSM) drives with position-offset and high-frequency (HF) square-wave voltage injection. Thanking to the simplified amplitude extraction process, the inductance parameters can be conveniently calculated from HF current amplitude under HF square-wave voltage injection. On this basis, the position-offset injection based model has been developed for the individual identification of the rotor flux linkage. Finally, the resistance can be estimated according to the steady-state voltage equations in harmonic subspace with the aid of known inductance. With the constructed multisource identification models, the rank-deficient problem of multiparameter estimation can be solved. Furthermore, the additional control dimensions of dual three-phase IPMSM have been utilized to avoid the torque disturbance from position-offset injection. The experimental results are presented to verify performance of the proposed method.