An Intelligent Fault Identification Model for Complex Wiring Connections in House Hold Heating Radiator Systems

Panel radiators are made of sheet steel. The surface is degreased, phosphate and primed with cathodes varnishing using a cataphoretic immersion method. (ETL) and powder coated (EPS). The output is a smooth glossy finish. The paint job is not only beautiful but also eco-friendly. In the standard version, the devices are offered in white from plate by optional order you can choose from any color side strips and top decorative grill, mounting kit with air vent valve and installed plugs. Models with a height of 300–900 mm additionally include a kit with a separating plug and mounting accessories. They are hung on the wall with the help of straps on the back of the radiator. Horizontal and vertical adjustment is possible when assembled. 200 mm high models are supplied without mounting plates and accessories and without insert. Low radiators can be installed on the floor or mounted on the wall. For this, special brackets are provided, which are ordered separately. There are four branch pipes on the sides of each radiator to connect to the heating system. Radiators are delivered already assembled in a cardboard box packed with protective film, which does not need to be removed during installation.