Accelerometer-Based Bed Occupancy Detection for Automatic, Non-Invasive Long-Term Cough Monitoring

We present a new machine learning based bed occupancy detection system that uses only the accelerometer signal captured by a bed-attached consumer smartphone. Automatic bed occupancy detection is necessary for automatic long-term cough monitoring since the time that the monitored patient occupies the bed is required to accurately calculate a cough rate. Accelerometer measurements are more cost-effective and less intrusive than alternatives such as video monitoring or pressure sensors. A 249-hour dataset of manually-labelled acceleration signals gathered from seven patients undergoing treatment for tuberculosis (TB) was compiled for experimentation. These signals are characterised by brief activity bursts interspersed with long periods of little or no activity, even when the bed is occupied. To process them effectively, we propose an architecture consisting of three interconnected components. An occupancy-change detector locates instances at which bed occupancy is likely to have changed, an occupancy-interval detector classifies periods between detected occupancy changes and an occupancy-state detector corrects falsely-identified occupancy changes. Using long short-term memory (LSTM) networks, this architecture achieved an AUC of 0.94. To demonstrate the application of this bed occupancy detection system to a complete cough monitoring system, the daily cough rates along with the corresponding laboratory indicators of a patient undergoing TB treatment were estimated over a period of 14 days. This provides a preliminary indication that automatic cough monitoring based on bed-mounted accelerometer measurements may present a non-invasive, non-intrusive and cost-effective means of monitoring the long-term recovery of patients suffering from respiratory diseases such as TB and COVID-19.