Eliminating or Shortening the Calibration for a P300 Brain–Computer Interface Based on a Convolutional Neural Network and Big Electroencephalography Data: An Online Study

A brain-computer interface (BCI) measures and analyzes brain activity and converts it into computer commands to control external devices. Traditional BCIs usually require full calibration, which is time-consuming and makes BCI systems inconvenient to use. In this study, we propose an online P300 BCI spelling system with zero or shortened calibration based on a convolutional neural network (CNN) and big electroencephalography (EEG) data. Specifically, three methods are proposed to train CNNs for the online detection of P300 potentials: (i) training a subject-independent CNN with data collected from 150 subjects; (ii) adapting the CNN online via a semisupervised learning/self-training method based on unlabeled data collected during the user’s online operation; and (iii) fine-tuning the CNN with a transfer learning method based on a small quantity of labeled data collected before the user’s online operation. Note that the calibration process is eliminated in the first two methods and dramatically shortened in the third method. Based on these methods, an online P300 spelling system is developed. Twenty subjects participated in our online experiments. Average accuracies of 89.38%, 94.00% and 93.50% were obtained by the subject-independent CNN, the self-training-based CNN and the transfer learning-based CNN, respectively. These results demonstrate the effectiveness of our methods, and thus, the convenience of the online P300-based BCI system is substantially improved.