A Portable 28-GHz Channel Sounder Platform and Measurement Results From Close-to-Ground Field Tests

This article describes a novel, bespoke, and low-cost 28-GHz RF TX and RX front end design that has been combined with a commercial Software-Defined Radio and Raspberry Pi controller to realize a portable propagation measurement system for the 28-GHz band. The complete sounder system can resolve an impulse from RX powers down to −107 dBm (3-dB impulse SNR) and the sounder TX can generate a signal of −8 dBm. Therefore, using 20-dBi antennas supports path-loss (PL) measurements of 139 dB. The sounder can resolve time-domain reflections to 33 ns in a channel measurement bandwidth of 60 MHz, producing both time-domain and frequency-domain results. The complete sounding system has been used to perform close-to-ground RF channel measurements, with propagation loss models and time-domain impulses extracted. Close-to-ground measurement is an underreported area of propagation research that is relevant for novel use-cases, such as in military applications or for mobile device-to-device communications. A key initial finding from the trials is that the PLs for 28-GHz indoor and outdoor links at circa 70 cm above ground seem close to that of free space, with very few strong reflections with delays exceeding 33 ns.