Electrically Small Antenna For RFID-Based Implantable Medical Sensor

We present a sub-GHz, low profile Electrically Small Antenna (ESA), designed for UHF RFID miniaturised battery free Implantable Wireless Medical Devices (IWMDs). The custom ESA is a linearly polarised dipole, and its topology leverages a meanderline structure to miniaturise its form factor. Furthermore, the ESA utilises a receded ground plane to improve its gain performance and achieve resonance, at the desired sub-GHz design frequency of 915 MHz. The ESA’s dipole characteristics provide an added benefit of 180° bi-directional RF signal propagation. The ESA’s design was optimised to integrate the footprint of a UHF RFID sensor chip (SL900A). By integrating the UHF RFID chip on the ESA, a complete wireless battery free sensory medical device, with an integrated antenna, can be realised. The antenna has a formfactor of
$12.75\times 12.25\times 0.29$
mm3. A prototype of the proposed ESA was fabricated and encapsulated in Polydimethylsiloxane (PDMS). Measurements of the prototyped ESA’s input reflection coefficient (S11) and farfield gain values, at 915 MHz, were −26.44 dB and −18.88 dBi, respectively and demonstrated significantly better gain and efficiency performance, when compared to peer reviewed work. The ESA can be used as an antenna for various battery-free subcutaneous implants with a connected sensor (e.g., temperature) or actuator (e.g., neurostimulator).