Numerical Simulation of C+L Broadband Single-mode Fiber

A novelty C+L single-mode fiber (CL fiber for short) which can expand L-band communication is proposed to meet the urgent demand of optical fiber transmission bandwidth for large capacity communication system. The influence of L-band attenuation on the optical signal-to-noise ratio (OSNR) of the system is analyzed and calculated; through the simulation of dense wavelength division multiplexing (DWDM) system, the requirements for fiber attenuation warping degree (FAWD) of CL fiber in 100Gbit/s rate DWDM system are obtained; and the CL fiber and its main attenuation parameters are defined. The results show that, the OSNR of L-band for conventional single-mode fiber will be 2dB-2.5dB worse than traditional C-band on 100km span system, so it is very important to limit the FAWD of L-band; if the L-band transmission can meet the link requirements in relevant standards, it is recommended that the FAWD Δα
1625
of CL fiber is suitable to be controlled below 0.015dB/km, and the fiber attenuation warping degree difference (FAWDD) Δα is suitable to be controlled below 0.005dB/km.