Fabrication for low-loss polymer optical waveguide with vertically 90° bent core

In this paper, we directly fabricate vertically 90-degree bent core polymer optical waveguide right above a VCSEL chip to be applied to an optical coupler in subminiature on-board optical engine. We have proposed the Mosquito method for fabricating polymer optical waveguide utilizing a microdispenser. In the procedure of the Mosquito method, the vertically 90-degree bent cores are dispensed just above VCSEL chips by taking the advantage of the Mosquito method: ability to form three-dimensional core wiring pattern. We emphasize in this paper that the number of the vertically bent core is increased to three that are aligned in parallel and small bending radius with the 3 parallel core structure can be formed.