Recognizing object surface material from impact sounds for robot manipulation

We investigated the use of impact sounds generated during exploratory behaviors in a robotic manipulation setup as cues for predicting object surface material and for recognizing individual objects. We collected and make available the YCB-impact sounds dataset which includes over 3,000 impact sounds for the YCB set of everyday objects lying on a table. Impact sounds were generated in three modes: (i) human holding a gripper and hitting, scratching, or dropping the object; (ii) gripper attached to a teleoperated robot hitting the object from the top; (iii) autonomously operated robot hitting the objects from the side with two different speeds. A convolutional neural network is trained from scratch to recognize the object material (steel, aluminium, hard plastic, soft plastic, other plastic, ceramic, wood, paper/cardboard, foam, glass, rubber) from a single impact sound. On the manually collected dataset with more variability in the speed of the action, nearly 60% accuracy for the test set (not presented objects) was achieved. On a robot setup and a stereotypical poking action from top, accuracy of 85% was achieved. This performance drops to 79% if multiple exploratory actions are combined. Individual objects from the set of 75 objects can be recognized with a 79% accuracy. This work demonstrates promising results regarding the possibility of using impact sound for recognition in tasks like single-stream recycling where objects have to be sorted based on their material composition.