Optimization Analysis of Full Life Cycle Energy Efficiency Multi-Objective Parallel Pump Sets

Aiming at the problem that the current single-objective control model of parallel pumping groups only focuses on the optimization of energy efficiency of operating conditions and operating costs, and cannot adjust the real-time working conditions of the pump group according to the comprehensive energy efficiency state of the pump group in the whole life cycle and adjust the pump group operation strategy accordingly, A multi-objective optimal control model for energy efficiency of a pump set is proposed, which can adjust the weight coefficients of three objective functions autonomously according to the current energy efficiency state of the pump set in the whole life cycle. In this way, the high energy efficiency of the parallel pump group in the low wear stage, that is, the low target deviation and specific energy consumption, and the high reliability in the high wear stage, that is, the lower impeller load improves the efficiency of the pump group in the whole life cycle and extend the service life of the pump group. Determine the multi-objective energy efficiency optimization control model of the pump group, use the main function linear and geometric weighting method, the ideal point value, and the distance deviation method to determine the objective function, and solve the multi-objective ideal point model with the help of LINGO, and obtain the optimal solution of the highest system total efficiency, the lowest pump group specific energy consumption and the highest system reliability. Pareto Frontier Comparison is used to study the transversality of the ideal point model solution set. Experimental results show that through the distribution of the model solution in the indicator space, the model can adjust the control strategy according to the real-time state of the pump group by adjusting the target weight combination.