Discussion on Operation and Maintenance Construction of Automation System

With the rapid development of the Internet era, more and more companies choose to use the micro-service architecture as an operation and maintenance method in order to maintain system stability while maintaining a certain operating efficiency. Difficulty in operation and maintenance. The microservice architecture splits the original single architecture into different services, and the log information between each module is no longer continuous and failures occur. Sometimes the on-site information collection is insufficient, the error location is more and more complicated, and the location of the system performance bottleneck is also difficult due to the interaction of multiple services. This article discusses the construction of automation system operation and maintenance. Based on some documents on automation operation and maintenance, summarizes the functional modules of automation system operation and maintenance, and pave the way for the design of automated operation and maintenance system below. First, the overall architecture of the system is proposed. Figure, on the basis of the design of some small modules, and finally the design of the system in this paper is tested, compared with the manual operation and maintenance, the system operation and maintenance time comparison. The release time after the system continues to deliver the module application is 0.5 times that of manual operation and maintenance, which greatly improves the operation and maintenance efficiency and guarantees the stability of the system.