Moisture based Irrigation System using Node MCU and REES52 Sensor

This particular irrigation practices an efficient way on monitoring the amount of water applied to the fields. It has a response monitoring system and a soil moisture sensor which is present here. This is used in agricultural related projects where the sensors have probes made up of nickel, and also it is very robust. This system responses in a way to measure the moisture which is present in particular soil with comparison in values/desired values provided by the user. It generates a notification if the water level of the soil goes below/above the values. It also helps in the problems which are related in agriculture where irrigation is done at irregular interval. Here, Irrigation System based on IoT along with ESP8266 NodeMCU Module is proposed. Initially, it identifies the moisture content and sends the data to application particularly data can be measured using gauge systems. Which shows us the moisture level and the type of soil? It indicates whether the motor has to be turned OFF or ON. The moisture is also monitored by Mobile Application Dashboard which displays the level of moisture content in soil. The project runs mobile application to display moisture content in soil which is to acquire the same. This content of moisture in soil is acquired by an application dashboard through connected Wi-Fi.