A Toggling Resistant In-Pedicle Expandable Anchor: A Preliminary Study

Loosening of pedicle screws after spinal fusion surgery can prevent the desired fusion between vertebrae and may be a reason for revision surgery. Especially in osteoporotic bone, toggling of pedicle screws is a common problem that compromises the fixation strength of these screws and can lead to loosening or axial pull-out of the screw. In this study, we explore the use of an in-pedicle expandable anchor that shapes to the pedicle to increase the toggling resistance of the anchor by increasing the contact area between the anchor and the dense cortical bone of the pedicle. A scaled-up, two-dimensional prototype was designed. The prototype consists of a bolt and ten stainless steel wedges that expand by tensioning the bolt. During the expansion, the wedges are required to compress the cancellous bone. Based on the first preliminary experiment, it was found that the expansion of the wedges resulted in successful compression of 5 PCF cancellous bone phantom (Sawbones). This preliminary study shows that an expandable in-pedicle anchor could be a feasible option to increase the toggling resistance of spinal bone anchors, especially in osteoporotic bone. Clinical Relevance- Toggling of pedicle screws is a major cause of screw loosening. In this preliminary study, the use of an in-pedicle expandable anchor to increase the toggling resistance of spinal bone anchors is explored.