Superconductive test cavity for the ESS

Measurements at the prototype cavity were performed at the FZJ Julich in order to support the design work of the SC accelerator part for the European Spallation Source (ESS). A shielded test facility has been constructed providing 25kW peak RF power operating at 500MHz. The test cavity has been fabricated at ACCEL Instruments and was installed into the shielded area. This 5-cell cavity has been designed to a /spl beta/ value of 0.75 at an accelerating field of E/sub acc/ > 5MV/m with Q/sub 0/ = 2 /spl times/ 10/sup 9/, operating at 4.2K. We have developed a cavity control circuit based on a fast analogue phase-lock loop allowing automated measurements. The first quasi static measurements using a 500W broadband amplifier almost verified the design values of Q/sub 0/ and E/sub acc/. The piezoelectric tuning system was used to record the spectrum of mechanical resonances of the cavity. A comparison of several computer simulations with measured results is presented. Furthermore, we have taken dynamical data of the Lorentz force detuning during pulsed-mode operation at a repetition rate of 50Hz. First results achieved with an active compensation of the Lorentz force detuning using the fast piezo frequency control system are also presented.