Compact and Integrated Microstrip Antenna Modules for mm-Wave and Microwave Bands Applications

This paper presents two different antenna modules at two different bands with a compact size structure that is used for both of mm-Wave and microwave bands, with the objective of keeping the size as minimum as possible. The presented structure consists of two integrated modules with overall dimensions of 24
$\times 15\times0.787$
mm
³
and is implemented on a Rogers RT5880 substrate. The first module is designed to resonate at 25.75 GHz with bandwidth of 4.15 GHz. The length of this module is taken as a constraint in designing the second module, which is the microwave one. This module is designed to have resonance frequency of 5.45 GHz with bandwidth of 1.12 GHz. The two modules are etched on the same substrate in an integrated fashion to give the required structure with two separate feeds and a separation gap between them in the ground plane. The proposed antenna structure is simulated using the CST-MW studio simulator, where it is found that for the mm-Wave module, the band’s gain is 5.58 dBi and the efficiency is 0.87 at 25.75 GHz. As for the microwave module, the gain is 2.45 dBi and the efficiency is 0.77 at 5.45 GHz. The proposed structure is implemented practically and the relevant measures agree with the simulated ones. A comparison of the proposed structure with other designs available in literature shows that it exhibits the minimum size among them, while keeping the other parameter values of comparable orders. The proposed structure is suitable for being used in 5G applications where both of the microwave and millimeter- wave bands are utilized.