Direct Torque Control With Phase Commutation Optimization for Single-Winding Bearingless Switched Reluctance Motor

Compared with the traditional control method, the direct torque control and direct force control method significantly reduces the torque ripple and the root-mean-square current of the phase winding in the single-winding bearingless switched reluctance motor. However, due to the unreasonable selection of voltage vectors and full cycle control, this method has some problems, such as too many control objects, excessive switching times, and low torque–ampere ratio. This article proposes an improved method for the abovementioned problems. First, the turn-
on
angle and conduction region of each phase winding are chosen as the control targets, and the operation principle is introduced accordingly. Second, according to the difference of the torque generated by the neighboring phases, the output torque can be distributed more properly to obtain the higher torque–ampere ratio in the commutation region. Finally, the sectors divided in the electrical space are reorganized and the corresponding voltage vectors are optimized. Experimental results show that the proposed method can secure lower torque ripples, fewer switching times, and copper loss. In addition, the torque–ampere ratio is improved as well.