An Ultrawideband and High-Absorption Circuit-Analog Absorber With Incident Angle-Insensitive Performance

This work presents an ultrawideband and high-absorption structure (UHAS) obtained by a fast design method. The proposed analytic approach can simply design single-FSS-layer absorber with ideal performance stability under oblique incidence. With this method, a composite material reinforced circuit-analog (CA) absorber is designed, which unit cell of CA sheet is a square ring loaded with chip resistors. At normal incidence, both TE and TM polarization simulation results demonstrate that the reflection coefficient below −10 dB is from 5.8 to 22.2 GHz; meanwhile, the reflection coefficient less than −20 dB covers a bandwidth of 7.4–19.1 GHz; also, there is a −30 dB absorption band in 8.6–17.2 GHz. Furthermore, under TE polarization, experimental results indicate that UHAS can maintain a −20 dB absorption band from 7.4 to 18.0 GHz within 40° oblique angle of incidence; −10 dB absorption is from 6.1 to 18.0 GHz within 50° oblique angle of incidence. The good agreement between simulation and measurement validates the proposed method and UHAS. Finally, the UHAS, with a protective layer, will be more stable in practical applications.