Reduced Voltage Stress Asymmetrical Multilevel Inverter With Optimal Components

The article presents a single phase asymmetrical multilevel inverter with a reduced components and low voltage stress which reduces the size and cost of the system. The structure provides a maximum output voltage of 23 levels with asymmetrical DC sources. There exists several reliability issues in lowering the total harmonic distortion (THD) by utilizing higher components in the design of MLI despite of its merits. Achieving reliability and lowering the THD is a challenging task for the researchers. The proposed 23-level MLI has been investigated with various performance parameters like total voltage standing (TSV), cost function (CF), power loss and efficiency analysis. The suggested MLI is compared with the existing topologies in the recent past and found that it has less voltage stress across the switches and cost-effective. The TSV calculations show that the proposed structure is more efficient in reducing the losses and increasing the efficiency. Hence, based on the evaluations and the comparisons made with the other topologies, it is found that the proposed MLI is well suited for the medium power applications such as FACTS, SVC, DSTATCOM and DVR. As the proposed architecture provides the 23 level output voltage values with asymmetrical DC sources, the configuration can be utilized for improving power quality in grid-connected renewable energy sources. The topology provides a less THD value which is under IEEE standards. The proposed architecture has been designed in MATLAB/Simulink and is implemented experimentally in hardware prototype in the laboratory environment.