Reachability Analysis Plus Satisfiability Modulo Theories: An Adversary-Proof Control Method for Connected and Autonomous Vehicles | IEEE Journals & Magazine | IEEE Xplore

Reachability Analysis Plus Satisfiability Modulo Theories: An Adversary-Proof Control Method for Connected and Autonomous Vehicles


Abstract:

Connected and autonomous vehicles (CAVs) are expected to operate with safety guarantee in presence of adversaries from the Internet of Vehicles. This article proposes a c...Show More

Abstract:

Connected and autonomous vehicles (CAVs) are expected to operate with safety guarantee in presence of adversaries from the Internet of Vehicles. This article proposes a control method named reachability analysis plus satisfiability modulo theories (RA-SMT) for CAVs against integrity attacks caused by bounded adversary. This method enables vehicles to possess the reach-avoid specification and strict control safety ensurance even in the worst case scenario. The introduction of state-feedback control decomposes the original complex problem into more manageable reachability analysis and adversary-free control strategy optimization. Precisely, zonotope sets are employed for reachability analysis, and the control strategy is optimally solved and verified simultaneously via SMT. This method is applicable to complex traffic scenarios with the help of SMT, which can describe various constraints flexibly and conveniently. Simulation results reveal the effectiveness and safety of the proposed method in the classical car-following scenario against bounded adversary under various conditions. Particularly, RA-SMT exhibits significantly improved control performance (around 16%) and computation efficiency (around 63%) compared with existing methods. Finally, the RA-SMT is implemented on an autonomous driving platform to validate its practicability.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 70, Issue: 3, March 2023)
Page(s): 2982 - 2992
Date of Publication: 12 April 2022

ISSN Information:

Funding Agency:


Contact IEEE to Subscribe

References

References is not available for this document.