High-Isolation Power Divider Based on Ridge Gap Waveguide for Broadband Millimeter-Wave Applications

In this article, a high-isolation power divider with ultrawideband characteristics for simultaneous operation in two adjacent bands is proposed. The power divider is developed based on a four-port coplanar Magic-T. The difference port of the Magic-T consists of a double-ridge gap waveguide (RGW) that supports quasi-TEM mode transmission, which provides the benefit of its broadband characteristics and allows for facilitated assembly. In addition, an inline microstrip line (MSL) containing a probe is inserted into the opposite side of the difference port to form the sum port. This basic configuration has actually achieved high isolation between the output arms and low return loss at each port, and however, its isolation bandwidth is limited by the narrowband matching of the sum port. To overcome this difficulty, a three-port microstrip T-junction is connected in series to the sum port of the Magic-T, resulting in a five-port 3-dB power divider with a wide isolation bandwidth. The process of considering this solution is analyzed and explained in detail in this article and the corresponding simulations and experimental verifications are performed. According to the obtained results, the proposed power divider has excellent overall performance, in particular low loss, ultrawideband, high isolation, and good amplitude/phase consistency.