A Modulation Method for Capacitance Reduction in Active-Clamp Flyback-Based AC–DC Adapters

Recent developments of fast-charging power delivery protocols are driving ac–dc adapters to 100-W power ranges. Conventional solutions in this power range employing a two-stage topology and a big twice-line frequency buffer capacitor are generally costly and bulky. This article presents a patent-pending modulation method for an active-clamp flyback converter, allowing for a single-stage adapter design with reduced capacitance requirements and higher efficiency. This is achieved by exploiting the inherent energy storage capability of the clamping capacitor while turning it into an active power buffer. No hardware modifications are needed, while all salient features of active-clamp flyback converter, i.e., soft switching and leakage recycling, are retained. Operating principles and detailed controller design are discussed, and a 100-W laboratory prototype is built. The prototype achieves 94% peak efficiency and up to 92% size reduction of the buffer capacitor. The experimental evaluation shows that the new single-stage solution enabled by the proposed modulation method is superior to the conventional two-stage and single-stage solutions in terms of cost, conversion efficiency, and power density.