Dynamic Aerial Wireless Power Transfer Optimization

Unmanned aerial vehicle (UAV)-enabled wireless power transfer (WPT) is a viable solution to remotely charge several energy receivers (ERs) in areas with intermittent access to a source of energy. However, given the limited available energy in the on-board battery of the UAV, which is mainly required to suffice propulsion energy consumption, the UAV struggles to roam seamlessly for long intervals. A key challenge is thus to efficiently use the limited battery energy, and accordingly prolong the UAV’s endurance, via controlling the underlying associated parameters such as cruising velocity. To further extend the battery lifetime, the UAV can also harness other sources of sustainable energy, such as sunlight, via solar energy harvesting. This paper studies a UAV-enabled WPT system, where a rotary-wing UAV transfers radio frequency (RF) wireless energy to several ERs at known locations. To offer uninterrupted seamless service, the UAV also harvests solar energy using solar panels. Considering the propulsion energy consumption of the UAV, we maximize the minimum average power received among all ERs over a finite cycle duration by jointly optimizing the UAV’s time allocation between harvesting and charging, flight trajectory as well as velocity, and transmit power allocation. Due to the non-convexity of the problem, we utilize the block coordinate descent (BCD) and successive convex approximation (SCA) methods. Numerical results show that the proposed solution outperforms benchmark schemes.