A Single-Layer Broadband Reflectarray in K-Band Using Cross-Loop Slotted Patch Elements

A broadband linearly polarized reflectarray antenna is designed by modifying a typically narrowband square patch unit element with cross-loop slot (CLS). Due to the introduction of the CLS, the unit patch element becomes multi-resonant and miniaturized. Besides, the outer length and width of the CLS are one-to-one related to the length of the patch. As a result, more than 480° phase range with quite good linearity is achieved. In addition, the phase ranges are almost parallel to each other from 22.5–26.5 GHz, which signifies its broadband property. Using such
$36\times 36$
CLS patches in a square aperture of 180 mm
$\times180$
mm size, an offset-fed reflectarray is constructed for an off-broadside radiation pattern. A prototype has been fabricated to experimentally validate the numerical results obtained using CST full-wave simulations. The measurement results exhibit a broad 1-dB gain bandwidth of 17.6% (22.44–26.78 GHz) and a peak gain of 32.2 dBi with an aperture efficiency of 60.6%. Moreover, both the cross-pol and side-lobe levels (SLLs) remain more than 40 dB and 21 dB, respectively, below the peak co-pol level throughout the 1-dB gain bandwidth. The proposed reflectarray can be used as a CubeSat antenna for K-band inter-satellite links (ISL).