Taxim: An Example-Based Simulation Model for GelSight Tactile Sensors

Simulation is widely used in robotics for system verification and large-scale data collection. However, simulating sensors, including tactile sensors, has been a long-standing challenge. In this letter, we propose Taxim, a realistic and high-speed simulation model for a vision-based tactile sensor, GelSight W. Yuan
et al
. A GelSight sensor uses a piece of soft elastomer as the medium of contact and embeds optical structures to capture the deformation of the elastomer, which infers the geometry and forces applied at the contact surface. We propose an example-based method for simulating GelSight: we simulate the optical response to the deformation with a polynomial look-up table. This table maps the contact geometries to pixel intensity sampled by the embedded camera. In order to simulate the surface markers’ motion that is caused by the surface stretch of the elastomer, we apply the linear displacement relationship and the superposition principle. The simulation model is calibrated with less than 100 data points from a real sensor. The example-based approach enables the model to easily migrate to other GelSight sensors or its variations. To the best of our knowledge, our simulation framework is the first to incorporate
marker motion field simulation
that derives from elastomer deformation together with the
optical simulation
, creating a comprehensive and computationally efficient tactile simulation framework. Experiments reveal that our optical simulation has the lowest pixel-wise intensity errors compared to prior work and can run online with CPU computing. Our code and supplementary materials are open-sourced at
https://github.com/CMURoboTouch/Taxim
.