Joint Hybrid and Passive RIS-Assisted Beamforming for mmWave MIMO Systems Relying on Dynamically Configured Subarrays

Reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) communication systems relying on hybrid beamforming structures are capable of achieving high spectral efficiency at a low hardware complexity and low power consumption. In this article, we propose an RIS-assisted mmWave point-to-point system relying on dynamically configured subarray connected hybrid beamforming structures. More explicitly, an energy-efficient analog beamformer relying on the twin-resolution phase shifters is proposed. Then, we conceive a successive interference cancelation (SIC)-based method for jointly designing the hybrid beamforming matrix of the base station (BS) and the passive beamforming matrix of the RIS. Specifically, the associated bandwidth-efficiency maximization problem is transformed into a series of subproblems, where the subarray of phase shifters and RIS elements is jointly optimized for maximizing each subarray’s rate. Furthermore, a greedy method is proposed for determining the phase shifter configuration of each subarray. We then propose to update the RIS elements relying on a complex circle manifold (CCM)-based method. The proposed dynamic subconnected structure as well as the proposed joint hybrid and passive beamforming method strike an attractive tradeoff between the bandwidth efficiency and power consumption. Our simulation results demonstrate the superiority of the proposed method compared to its traditional counterparts.