Simulation and Analysis of Bistatic Radar Scattering From Oil-Covered Sea Surface

In this study, the bistatic radar scattering coefficients related to an oil-covered sea surface are predicted by modeling both the oil damping effect on surface roughness–through the advanced integral equation method–and the oil modification on the dielectric properties of the scattering surface. The bistatic scattering is analyzed in the whole upper scattering space under different radar frequencies, incidence angles, wind speeds, and oil thicknesses. Numerical predictions show that the scattering energy of an oil-covered sea surface is generally higher in the forward scattering zone than that in the backward one. In addition, the oil damping effect is the main mechanism ruling the scattering behavior in the backward region. The information related to the bistatic scattering geometry is also explored to retrieve oil thickness, representing one of the key parameters for radar-based marine oil pollution observation. A new index is proposed to quantify the sensitivity of bistatic scattering coefficients to oil thickness in different cases: single-polarization features, dual co-polarization features, namely, the polarization ratio (PR) and the normalized polarization difference index (NPDI), and dual-angular scattering features. Numerical results show that the bistatic scattering coefficients result in an enhanced sensitivity to oil thickness with respect to the monostatic case. The single HH-polarized scattering coefficients show better oil thickness sensitivity in the backward region, while the VV-polarized ones are more sensitive to oil thickness in the forward region. The combination of dual-polarized scattering coefficients significantly improves the oil thickness sensitivity compared to single-polarization radar observations, especially in the forward region. PR outperforms NPDI, even though the latter can suppress the effect of wind speed. The combination of dual-angular observations can significantly increase its sensitivity of oil thickness in the backward region but at the expense of reduced sensitivity in the forward region.