Modified Optical Burst Switching (OBS) Based Edge Node Architecture Using Real-Time Scheduling Techniques

Contention is the main problem in optical burst switching (OBS) systems that lead to loss more burst by dropping the contended burst. To deal with this problem, we propose a new proactive method which is based on the integration of Real-Time Scheduling Techniques: Earliest-deadline-first (EDF) and round-robin (RR). Based on this consideration, this paper proposes a series of novel coherent interdependence methods to propose a novel OBS edge node Architecture: (i) An adaptive priority system to obtain QoS guarantees, (ii) Admission control and bandwidth distribution to maximize the link throughput. The proposed technique classifies the incoming data packets into two categories: granted service (GS) for high priority and best effort (BE) for low priority. The RR technique is used for scheduling different BE and GS packets when they have the same deadlines while the EDF is used to manage GS packets with different deadlines. In addition, the admission and bandwidth assignment policies vary in function of traffic characteristics. For GS traffic, only the bandwidth used is needed, while the remaining bandwidth is assigned to best effort traffic. With the EDF and RR scheduling algorithms, the proposed edge node design obtains a brand new architecture. The proposed OBS architecture has been tested for dynamic traffic in which both BE and GS traffic arrives according to a Poisson distribution for different scenarios based on traffic distribution and switch resources reservation. In scenario#1, 90% GS traffic and 10% BE traffic and reserve 7% of the switch resources for BE traffic are considered. Therefore, the proposed architecture provides a higher grade of service to the end-users with the guaranteed service level of agreements than the existing architecture that does not implement resource reservation protocols. In addition, the modified OBS-edge node is designed and implemented on FPGA Virtex-11C2V40. The hardware performance analysis shows that the network dimension is a key factor in latency measurement. A
$2\times 2$
network dimension can serve approximately 230 Mbps throughput and approximately 400 Mbps in the case when the number of flits (segment of burst) is twice.