Poster: A Methodology for Semi-Automated CAN Bus Reverse Engineering

Semi-automated Controller Area Network (CAN) reverse engineering has been shown to provide decoding accuracy comparable to the manual approach, while reducing the time required to decode signals. However, current approaches are invasive, as they make use of diagnostic messages injected through the On-Board Diagnostics (OBD-II) port and often require a high amount of non-CAN external data. In this work, we present a non-invasive universal methodology for semi-automated CAN bus reverse engineering, which is based on the taxonomy of CAN signals. The data collection is simplified and its time reduced from the current standard of up to an hour to few minutes. A mean recall of around 80% is obtained.