A Reconstruction Filter for Saturated Accelerometer Signals Due to Insufficient FSR in Foot-Mounted Inertial Navigation System

In pedestrian inertial navigation, one possible placement of Inertial Measurement Units (IMUs) is on a footwear. This placement allows to limit the accumulation of navigation errors due to the bias drift of inertial sensors and is generally a preferable placement of sensors to achieve the highest precision of pedestrian inertial navigation. However, inertial sensors mounted on footwear experience significantly higher accelerations and angular velocities (10s of g and 1000s of deg/sec) during regular pedestrian activities than during more conventional navigation tasks, which could exceed Full Scale Range (FSR) of many commercial-off-the-shelf IMUs, therefore degrading accuracy of pedestrian navigation systems. This paper proposes a reconstruction filter to mitigate localization error in pedestrian navigation due to insufficient FSR of inertial sensors. The proposed reconstruction filter approximates immeasurable accelerometer’s signals with a triangular function and estimates the size of the triangles using a Gaussian Process (GP) regression. To evaluate performance of pedestrian navigation systems enhanced by the proposed reconstruction filter, we conducted two series of indoor pedestrian navigation experiments with a VectorNav VN-200 IMU and an Analog Device ADIS16497-3 IMU, which have accelerometer’s FSR of ±16 g and ±40 g, respectively. In the first series of experiments, forces experienced by the foot-mounted IMUs did not exceed the FSRs of the sensors, while in the second series, the forces surpassed the FSR of the VN-200 IMU and saturated the accelerometer’s readings. The saturated accelerometer’s readings reduced the accuracy of estimated positions using the VN-200 by
${1.34}\times $
and
${3.37}\times $
along horizontal and vertical directions. When applying our proposed reconstruction filter to the saturated accelerometer’s measurements, the navigation accuracy along horizontal and vertical directions was increased by 5% and 50%, respectively, as compared to using unreconstructed signals.