Piezoelectric Force Sensor-based Measurement System for Recoil Force Analysis

In this study, a piezoelectric force sensor-based experimental recoil force analysis was performed via examining the formation and effects of recoil forces after overviewing the related experimental studies in the literature. The experimental measurement and the analysis of the recoil forces of the selected shotguns were carried out systematically after selecting the accurate piezoelectric force sensor for the dynamic performance of the recoil mechanism. The experimental setup required for the measurement was built via integrating the selected piezoelectric force sensor, signal conditioner, data acquisation card with a software developed in Visual Basic .NET software language. A developed measuring apparatus was designed to measure the dynamic recoil forces of different shotgun system. The selected piezoelectric force sensor can detect the recoil forces with 36 kHz measurement capacity. All of the data were recorded in real-time. The recorded data were examined, and analyzed comparatively. The collected measurement results are evaluated according to the recoil mechanisms, barrel lengths, weights, and other effective parameters that may affect the recoil forces in the experimental analysis. It was observed that the shotgun that spreads the recoil force over time reduces the peak point and has minimum total recoil energy among the gas cycle, inertia and hybrid shotguns with 71cm barrel length and included 12GA caliber.