Design and Fabrication of Rectangular Microstrip Antenna with Various Flexible Substrates

In addition to being small, light, practical, and cheap to manufacture, microstrip antennas are also exceedingly difficult to obtain the most suitable electrical parameters such as resonance frequency, bandwidth, return loss, gain, efficiency, and standing wave ratio. To achieve this, researchers are trying different physical structures and applying optimization techniques to them in order to obtain the most suitable radiation power and shape in different sizes and materials. Especially at high frequencies, the dielectric property of the material used can change all the parameters of microstrip antennas and affect the antenna performance to a great extent. The purpose of this study is to investigate the impacts of the physical structure and electrical properties of various textile materials and obtaining the most suitable material. For this purpose, textile-based wearable rectangular microstrip antenna designs were carried out on three different resonant frequency bands, which are widely used with different textile products such as felt, photo paper, and fiberglass, and their performances were examined. The proposed antennas on felt, photographic paper, and fiberglass substrates, were designed and manufactured. The feeding line and radiating and ground planes were formed using conductive (copper) tape. The operating frequency range of the antenna was chosen between 2 GHz and 10 GHz, and the simulated gain of the antenna was obtained as 5.31 dB. The measurement S
11
results demonstrate that the results are in good agreement with the simulated ones. The proposed antenna allows continuous monitoring of patients at high risk of cancer.