Internal Model Based Grid Voltage Estimation and Control of a Three-Phase Grid Connected Inverter for $PV$ Application

Grid connected inverter controllers require the magnitude and phase of the point of common coupling voltage for the generation of unit vectors from a phase locked loop. However, weak grid conditions or grid voltage sensor failures might substantially increase control difficulty in the inverter due to unknown grid impedance which causes instability in the phase locked loop. In this paper, an internal model based grid voltage estimation architecture has been presented. The proposed control architecture relies on the current measurements along with nominal values of filter parameters for the point of common coupling voltage estimation and unit vector generation. Detailed stiffness and robustness analyses are presented to show that the proposed control and estimation architecture is nearly insensitive to parameter variations. In comparison to conventional current control with both voltage and current sensors, the proposed current control scheme provides better transient response during both ideal and non-ideal grid voltage conditions. Experimental results on a reduced scale laboratory prototype validate the efficacy of the proposed architecture.