Fiber Vector Eigenmode Multiplexing Based High Capacity Transmission Over 5-km FMF With Kramers-Kronig Receiver

Vector modes (VMs) with spatially nonhomogeneous polarization patterns, combining polarization and spatial-mode degrees of freedom together, are regarded as the eigenmodes of optical fiber. Such eigenmodes have potential to be used to implement the high capacity spatial division multiplexing (SDM)/mode division multiplexing (MDM) based optical fiber communication systems. Here, we respectively demonstrate 2 VMs of the same order (l = +2, EH11o and EH11e modes) and 2 VMs of different orders (l = 0, HE11o mode and l = +2, EH11e mode) multiplexing transmissions over 5-km few-mode fiber (FMF). The mode crosstalk after FMF transmission has been minimized to prepare high capacity signal transmission without multiple-input-multiple-output (MIMO) digital signal processing (DSP). To increase the transmission capacity and decrease the system cost, the Kramers-Kronig (KK) receiver has been employed and the single-wavelength two sets of eigenmodes multiplexed 360 Gbit/s and 400 Gbit/s signal transmissions over 5-km FMF link are realized, respectively. Then, to further burst the transmission capacity, 2 vector-mode-division-multiplexing channels (HE11o and EH11e modes) in combination of 5 wavelength-division-multiplexing (WDM) channels with a total of 10 parallel channels have been demonstrated. A total data rate of 1.12 Tbit/s with 28 GBaud 16-state quadrature amplitude modulation (QAM) signal has been realized over the 5-km FMF. In all data-carrying experimental demonstrations, the bit-error rate (BER) performance of each VM channel is below the 7% hard decision forward error correction threshold (FEC) at BER of 3.8 × 10
^-3
. The experimental results highlight that the VMDM-based optical transmission technology could find enormous potential in huge-capacity short-reach optical interconnects.