Distributed Beams: Concept of Operations for Polarimetric Rotating Phased Array Radar

Important requirements for a future generation of weather surveillance radars include improvements in data quality and more rapid update of volumetric data. Phased array radar (PAR) is a candidate technology capable of providing the required functionality. The rotating PAR (RPAR) is a potential architecture that could improve the capabilities of the current parabolic-reflector-based US Weather Surveillance Radar—1988 Doppler (WSR-88D) operational network and is more affordable than other candidate PAR architectures. However, RPAR concept of operations that support observational needs has to be developed. The
Distributed Beams
(DB) technique introduced in this article provides a way to either reduce the scan times or to reduce the variance of radar-variable estimates by azimuthally spoiling the transmit beam while receiving multiple digital beams as the radar rotates in azimuth. Specifically, the rotation speed of the pedestal is derived from the duration of the coherent processing interval (CPI) to produce the desired spatial sampling. This results in beams from subsequent CPIs in approximately the same directions, which increases the number of available data samples for processing. The increased number of available samples can be coherently processed to reduce the variance of estimates. Alternatively, by reducing the number of samples per CPI and increasing the RPAR’s rotation rate, the scan time can be reduced without increasing the variance of estimates. Results presented demonstrate both applications of the DB technique for dual-polarization observations. Given that this technique makes use of spoiled transmit beams, its benefits come at the expense of degraded angular resolution (beamwidth and sidelobe levels), and reduced sensitivity compared with the use of pencil beams. The technique could be implemented as part of an RPAR concept of operations to meet requirements for the future weather surveillance network if certain tradeoffs are accounted for in the radar design process.