Design and Development of Automatic Transfer Switch System, Energy Saving Emergency Panel

The main objective of this paper is to design and develop ATS control system. Our team emphasizes our efforts to take advantage of cheap, easy to obtain and free renewable energy to replace the electricity we use every day and buy from the State Electricity Company. The Emergency Panel indicates that the panel must be able to adjust the power supply to continue running without any interruption or interruption in any condition with the help of a power supply from an Uninterrupted Power Supply. It is estimated that with the right planning and calculations, it is expected that there will be a savings in electrical power of 25%, when the system operates normally. This system design can be used to control large or small power supplies, by adjusting the capacity of the main power circuit. In this research, we designed a system for single phase 2200 VA, 220 V, 50 Hz power supply. Based on the field test, if the Solar Power Source is operated at 10.00-14.00, there will be 7144 Wh of electricity supplied by Solar Power Source, while the need for electrical energy in one day is 33753 Wh, so it can be concluded that the Solar Power Source can save electricity consumption by 21, 17% of total daily energy consumption.