Stability Effect of Control Weight on Multiloop COT-Controlled Buck Converter With PI Compensator and Small Output Capacitor ESR

Multiloop constant on-time (COT) controlled buck converter uses two weight resistors for sensing inductor current and detecting output voltage in its inner loop. When an output capacitor with a small equivalent series resistance (ESR) is employed, the converter will suffer the risk of instability due to different weight settings of inductor current and output voltage using a proportional-integral (PI) compensation gain in the outer voltage loop. However, no attention has been paid for their stability effects, which are important for designing the inner loop and outer voltage loop. To address these issues, a piecewise linear model is established for multiloop COT-controlled buck converter. Circuit parameter-related bifurcation behaviors and control weight-related dynamical distributions are explored to demonstrate these stability effects. Furthermore, by deriving an approximate discrete model, a control weight-related stability criterion is expressed explicitly, from which stability boundaries for dividing the normally stable and abnormally unstable operation parameter regions are thereby yielded. Besides, control weight-related transient performances under different circuit parameter settings are analyzed. Finally, PSIM circuit simulations and hardware circuit experiments verify the theoretical analysis well.