Defeating Smart and Reactive Jammers with Unlimited Power

Among all wireless jammers, dealing with reactive ones is most challenging. This kind of jammer attacks the channel whenever it detects transmission from legitimate radios. With recent advances in self-interference suppression or in-band full-duplex radios, a reactive jammer can jam and simultaneously sense/discern/detect the legitimate transmission. Such a jammer is referred to as a smart reactive jammer. However, all existing solutions, e.g., frequency hopping and rate adaptation, cannot effectively deal with this type of jammer. This is because a smart reactive jammer with sufficient power budget can theoretically jam most, if not all, frequency channels at sufficiently high power. This work proposes to augment the transmitter with an ambient backscatter tag. Specifically, when the jammer attacks the channel, the transmitter deceives it by continuing to transmit data to attract the jammer while the tag backscatters data based on both the jamming signals and active signals from the jammer and transmitter, respectively. However, backscattering signals from multiple radio sources results in a high bit error rate (BER). Thus, we propose to use multiple antennas at the receiver. The theoretical analysis and simulation results show that by using multiple antennas at the receiver, the BER and hence the throughput of the system can be significantly improved. More importantly, we demonstrate that with our proposed solutions, the average throughput increases and the BER decreases when the jammer attacks with higher power levels. We believe that this is the first anti-jamming solution that can cope effectively with a high- or even unlimited-power jammers.