A Decoupling and Matching Network Design for Single- and Dual-Band Two-Element Antenna Arrays

This article presents a new decoupling and matching network (DMN) design for symmetric, single- and dual-band two-element antenna arrays. The DMNs use parallel-line-based coupling elements. The decoupling between the output ports of the proposed DMN and the reflection coefficients at these ports is obtained using the scattering parameters of the coupled antenna array and those of the DMN. These are clearly expressed as functions of the DMN’s design parameters. These design parameters are determined using a simple numerical method to provide high inter-element isolation and good impedance matching for the array. To verify the proposed synthesis procedure, three DMN example designs are considered. These include one for a single-band array and two for dual-band arrays having different frequency ratios. Prototypes of these antennas along with their DMNs were designed, fabricated, and experimentally characterized. In each case, a good agreement between the measured and theoretical results is achieved. Simulation and measurement results show that the proposed DMN design and its associated synthesis procedure can be employed to significantly improve the interelement isolation of single- and dual-band, two-element arrays in various scenarios.