Double Input Boost/Y-Source DC-DC Converter for Renewable Energy Sources

With the increasing adoption of renewable energy sources by domestic users, decentralisation of the grid is fast becoming a reality. Distributed generation is an important part of a decentralised grid. This approach employs several small-scale technologies to produce electrical energy close to the end users or consumers. The higher reliability of these systems proves to be of advantage when compared to traditional generation systems. Multi-Input Converters (MICs) perform a decisive function in Distributed Energy Resources (DERs). Making use of such MICs prove to be beneficial in terms of size, cost, number of components used, efficiency and reliability as compared to using several independent converters. This thesis proposes a double input DCDC converter which makes use of a quasi Y-source converter in tandem with a boost converter. The quasi Y-source converter has the advantage of having a very high gain for low duty cycles. The associated operating modes are analysed and the operation of the MIC is verified using simulation result. A hardware prototype is built for large signal analysis in open loop. Different loads are applied and the efficiency of the MIC as a whole as well as the load sharing between the different sources is investigated.