$L$ -Band Ocean Surface Roughness

Surface wave spectral properties of centimeter to decameter (cmDm) wavelengths are of great interest to microwave remote sensing of the ocean. They are obviously different from the high-frequency extension of the wind-wave spectrum models developed for ocean science and engineering applications, which focus on the longer waves in the energetic peak region of the wave spectrum. For more than six decades, the cmDm waves are generally considered to be in the equilibrium range, and its spectral function has a constant slope: -5 or -4 in the 1-D frequency spectrum, and -3 or -2.5 in the 1-D wavenumber spectrum. The observed wind-wave spectral slopes, however, are not constant. As a result, the cmDm wave properties are significantly different from those inferred from an equilibrium spectrum model. Surface slope measurements are more suited for studying the cmDm waves. Microwave radar backscattering cross sections have been used to study the shorter range of cmDm waves. L-band lowpass-filtered mean square slope (LPMSS) is contributed by waves longer than about 0.6 m, here referred to as the decimeter to decameter (dmDm) waves. The analysis of LPMSS has improved the modeling of dmDm waves. Ultimately, the spectral slope variation is a critical characteristic of cmDm waves. The wave spectrum model formulated with the variable spectral slope consideration produces very good agreement with L-band scatterometer and reflectometer measurements.