Frequency Multiplier-Based Millimeter-Wave Vector Signal Transmitter Using Digital Predistortion With Constrained Feedback Bandwidth

We have demonstrated a frequency multiplier-based multiplying transmitter (MT) architecture, which shows the transmission of wideband modulated signals from the lower frequency band to the millimeter-wave (mm-wave) through the frequency multiplier directly is a viable option. To compensate for the severe nonlinear distortions exhibited by the frequency multiplier in a more efficient way, a two-stage cascaded digital predistortion (DPD) scheme with constrained feedback bandwidth is proposed. The complexity-reduced generalized memory polynomial (GMP) and Nth-order power/root module are used for nonlinear behavioral modeling. Furthermore, the spectral extrapolation and band-divided (BD) modeling methods are employed to achieve more accurate linearization performance of the frequency multiplier over the limited feedback bandwidth. The MT experimental system with an active frequency quadrupler at the Q-band was set up to evaluate the linearization capacity of the proposed BD Nth-order cascaded complexity-reduced GMP (BD-N-CGMP) DPD scheme. In the test for 24-MHz bandwidth 16 quadrature amplitude modulation (QAM) signal, the frequency quadrupler's linearized output at 48.6 GHz with error vector magnitude (EVM) of 1.94% and adjacent channel power ratio (ACPR) of -47.2 dBc could be achieved, even when the feedback bandwidth was limited from 480 to 78 MHz. This demonstrated system significantly decreased the requirement of the digital-to-analog converters (DACs) and analog-to-digital converters (ADCs) sampling rate, and showed promising performances for future MT architecture at mm-wave and subterahertz (sub-THz) frequencies with large signal bandwidth.