Components Sharing Based Integrated HVDC Circuit Breaker for Meshed HVDC Grids

DC fault isolation is one of the main challenges of the HVDC grid. DC fault current can be interrupted within several milliseconds by employing hybrid HVDC circuit breaker. However, this scheme is not cost-effective, especially in meshed HVDC grid. In this paper, a novel integrated HVDC circuit breaker by sharing components is proposed to overcome these drawbacks. Suppose that a converter in a meshed HVDC grid is connected to m DC lines. The integrated HVDC circuit breaker consists of m + 1 ultra-fast disconnectors (UFDs), m + 1 load commutation switches (LCSs), m + 1 mechanical disconnectors (DSs), and only one main breaker (MB) and surge arrester (SA). The behavior of the proposed integrated HVDC circuit breaker is similar to that of the conventional hybrid HVDC circuit breaker. These two kinds of breakers have the same operating time, which means the integrated HVDC circuit breaker is fast enough to clear DC faults. Besides, the IGBT modules in the MB and LCSs of the proposed integrated HVDC circuit breaker are connected in one direction, and the m DC lines share a single MB. Therefore, this scheme is more cost-effective compared to the conventional hybrid HVDC circuit breaker. Moreover, the adjacent lines can still be used to transmit power after DC bus faults. Simulation results on a three-terminal HVDC grid are presented to verify the effectiveness and feasibility of the proposed scheme.