Design and Fabrication of Fluidized Bed Incinerator

Now a day's burning of medical waste and municipal waste are becoming very harmful and made the environment pollutant and toxic. These wastes are not fully burnt. For avoiding this pollution, we are going to burn this medical waste and municipal waste in a closed chamber called fluidized bed incinerator were this wastes are fully burnt and free from toxic pollution. Due to burning these wastes in the closed chamber, more amount of heat dissipated around the incinerator and this heat dissipated is not used properly. In our project we are going to use the heat dissipated by the incinerator. We are going to minimize the inorganic bio-medical waste that is produced in the hospitals and other wastes that are produced after combustion are reused in usable ways. So that environmental pollution produced by the hospital waste such as Deep Well Injection, Pyrolysis etc, affects agricultural lands, ground water and cause global warming that affects the complete biosphere. That can be controlled in our project in a very good manner. In our project the flue gases that come out after combustion are filtered by various methods of filtration. The heat dissipated from the incinerator is cooled by the water that can be used as hot water that can be used in the hospital for various purposes such as sterilizing the syringe, cleaning the utensils, medical equipment's etc.