Remotely Actuated Needle Driving Device for MRI-Guided Percutaneous Interventions: Force and Accuracy Evaluation

This paper presents a 2 degrees-of-freedom (DOF) remotely actuated needle driving device for Magnetic Resonance Imaging (MRI) guided pain injections. The device is evaluated in phantom studies under real-time MRI guidance. The force and torque asserted by the device on the 4-DOF base robot are measured. The needle driving device consists of a needle driver, a 1.2-meter long beaded chain transmission, an actuation box, a robot controller and a Graphical User Interface (GUI). The needle driver can fit within a typical MRI scanner bore and is remotely actuated at the end of the MRI table through a novel beaded chain transmission. The remote actuation mechanism significantly reduces the weight and size of the needle driver at the patient end as well as the artifacts introduced by the motors. The clinician can manually steer the needle by rotating the knobs on the actuation box or remotely through a software interface in the MRI console room. The force and torque resulting from the needle driver in various configurations both in static and dynamic status were measured and reported. An accuracy experiment in the MRI environment under real-time image feedback demonstrates a small mean targeting error (<1.5 mm) in a phantom study.