Development of a Low Cost & Low Noise Amplification System For In Vitro Neuronal Recording through Microelectrode Arrays

In order to effectively record from electrically active cells through microelectrode arrays a low-noise amplification and data acquisition system is required. Although commercially available, these systems can be expensive and lack the freedom to customise hardware and software. In this work we present a low-cost (US$21 for the first channel + US$11 for each additional channel), low-noise amplifier coupled with an analog to digital converter from National Instruments. The amplifier was designed to (i) operate between 0 and 5 V utilising a DC battery power supply, (ii) operate within a bandwidth of 10 kHz, (iii) remove DC voltage created at the electrode/electrolyte interface with a high-pass cut-off frequency of 0.7 Hz and (iv) have a gain of 2000. Strategies to reduce environment electromagnetic interference at the amplifier front end were employed and involved a customised neural interface board connected between the microelectrode array and amplifier. The constructed amplifier achieved an intrinsic noise amplitude of 0.8 μVrms, which facilitated high quality recordings as exemplified by in vitro recordings from primary hippocampal neurons.