Effects of Hexagonal Boron Nitride Sheets on the Optothermal Performances of Quantum Dots-Converted White LEDs

Recently, quantum dots-converted white lightemitting diodes (QDs-WLEDs) are attracting numerous attention due to their high luminous efficiency and excellent color quality. As for color conversion material, the quantum dots (QDs) are commonly embedded into a low-thermalconductivity polymer matrix. In this case, their generated heat during the photoluminescence process can hardly be dissipated into the heat sink, leading to a high working temperature and reduced lifetime. Adding particles with high thermal conductivity to the QDs layer can enhance its thermal conductivity, and thus reduce QDs' working temperature. At the same time, these particles may affect the optical properties of QDs. However, this problem has still not been deeply studied. In this article, we systematically investigated the effects of the highly thermalconductive hexagonal boron nitride sheets (hBNSs) on the optothermal performances of QDs/phosphor film in white light-emitting diodes (WLEDs). The thermal conductivity of QDs/phosphor film was significantly increased by 24% after adding 5wt% of 45-μm-diameter hBNS. As for the optical performance, the transparency of the silicone gel film with 45-μm-diameter hBNS was much better than that with 6-9-μm-diameter hBNS under the same weight fraction. Furthermore, the scattering effect of hBNS plays a more important role in enhancing the light conversion performance of QDs than that of phosphor. At last, a color stability test showed the increasing rate of correlated color temperature (IRCCT) of hBNS-added WLEDs are 21% smaller than that of common WLEDs after working 153 h, meaning a better QDs stability in hBNS-added WLEDs.