Multi-Resonance-Core-Based Dickson Resonant Switched-Capacitor Converters With Wide Regulation

The Cuk dual resonance core (DRC) realizes overlapped dual resonance to regulate its output voltage. However, the DRC configuration was only applied to the Fibonacci switched-capacitor converter (SCC), series–parallel SCC, and voltage doubler. In this paper, the Cuk DRC is modified and then is extended to the Dickson SCC to form a multi-resonance-core-based (MRC) Dickson resonant switched-capacitor converter. All charging and discharging loops achieve soft charging, and so the inherent capacitor charge sharing loss and the high current transient spikes are eliminated. The modular configuration makes the MRC Dickson easy to be extended to a higher voltage level. The on-time fixed frequency modulation is adopted, all transistors being turned on with zero-current-switching (ZCS) operation and all diodes being turned off with ZCS operation. Most importantly, the conversion ratio of the MRC Dickson can be regulated continuously, widely, and efficiently even at light load condition, which is a huge advantage over the traditional Dickson SCC with limited control headroom. A comprehensive analysis of the operation principle, voltage-gain curve, component stress analysis, and output characteristic is provided. The converter operation principle and regulation capability were verified by both simulation and experiment.