Elimination of the Interaction of the Converters in Switch-Linear Hybrid Envelope Tracking Power Supplies

As a combination of the switched-mode converter and linear amplifier, the switch-linear hybrid (SLH) envelope tracking (ET) power supply can achieve high efficiency and high tracking bandwidth simultaneously, and it can be classified into three types, namely, series-form, parallel-form, and series–parallel-form. In the SLH ET power supply, interaction may occur between the converters, and as a result, the controlled variable will deviate from its target. In this paper, the interaction in the series-form SLH ET power supply with different structures is analyzed first from the aspects of control and parasitic capacitances, and the feedforward control scheme and/or filter is adopted to eliminate the interaction. Then, for the parallel-form SLH ET power supply, four current control methods are introduced and compared from the current tracking and disturbance-rejection performances, and the method for suppressing the disturbance is presented. Since series–parallel-form SLH ET power supply contains at least three converters, the interaction is more complex. On the basis of the analysis of the series-form and parallel-form SLH ET power supplies, the interaction between the converters in series–parallel-form SLH ET power supply is analyzed and followed by the corresponding elimination method. Finally, one series-form, and one parallel-form SLH ET power supplies are implemented in the lab, and the experimental results verify the theoretical analysis.