Adaptive Channel Assignment With Predictions of Sensor Results and Channel Occupancy Ratio in PhyC-SN

Applications related to the Internet of Things are widely diversified and require both low latency and the access of massive sensors to wireless sensor networks. In physical wireless parameter conversion sensor networks (PhyC-SN), a fusion center (FC) can recognize information from all sensors on the frequency spectrum of the received signals via conversion from sensor information to signal frequency. The higher resolution of sensor information of PhyC-SNs requires securing more frequency bandwidth. Therefore, spectrum sharing between PhyC-SNs and other systems is essential. For this study, we assume that primary systems (PSs) refer to other wireless systems and that secondary systems (SSs) refer to the PhyC-SN. The SS detects any access from the PS and immediately stops access to an FC. This results in a loss of sensor information. Thus, the accuracy of the gathered sensor information by an FC is degraded. This paper proposes an adaptive channel assignment based on two predictions; sensor information and channel occupancy rate. In the proposed method, the predicted error caused by the cessation of channel access is calculated and the assignment is constructed by minimizing this predicted error. Since the sensor can select channels in accordance with the error of an instantaneous sensor result, the proposed channel assignment can utilize awareness of the instantaneous sensor result. The proposed method achieves high accuracy of gathered sensor information while delivering less frequent sensor information to the FC, thereby improving the utilization efficiency of frequency channels.